CAT NO: DIDACTICChemical Engineering0004
Plug Flow Reactor Coiled Tube Type Ministerial Tender Board Equipment, Ministry of Education and Vocational Training Lab Tenders Suppliers India.
Plug Flow Reactor Coiled Tube Type
In an ideal Plug Flow Reactor {PFTP} there is no mixing in the
direction of flow and complete mixing perpendicular to direction of
flow.
Concentration of reactants varies along the length of reactor but
not in radial direction. In case of a coil turbulence is introduced due
to frequent change in direction of flow and presence of secondary flow,
so a higher value of reaction rate constant is expected in coil tube
type plug flow reactor. This set-up is used to study a non-catalytic
homogeneous reaction under isothermal condition.
The set up
consists of two feed tanks through which two reactants are fed to the
reactor. Rotameters are provided to measure the individual flow of
Chemicals. The flow rate can be adjusted by operating the needle valves
provided on respective Rotameter. The magnetic drive pump is used for
circulation of feed. It is a helical coil tube type reactor. Reactants
enter at lower end coming out of the top of coil from where samples are
collected for analysis
Experiments
Sponification Reaction Study in straight tube Plug Flow Reactor.
To determine Reaction Rate Constant
Utilities Required
Water Supply & Drain
Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted
Chemical Reaction Engineering lab equipment manufacturers,exporters and Chemical Reaction Engineering Lab suppliers