- Civil Lab Mechanical Lab Engineering Lab Equipments
- sales@didacticlabequipments.com
This is a brass tube approximately 53cm long and 2. 8cm i. D. With a wooden handle.....
Product Code: DIDACTICLABNLE-Export-038001
The apparatus is used for determining the workability of fresh concrete, provided the maximum size of the aggregate does not exceed 38mm.....
Product Code: DIDACTICLABNLE-Export-038002.jpg "Concrete Test Hammer (Small) For Testing Lab")
The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products.....
Product Code: DIDACTICLABNLE-Export-038003.jpg "Concrete Test Hammer (Big) For Testing Lab")
It is similar to the above but is used for testing concrete with over size aggregates (for which test, cubes promise no reliable results) and for testing concrete roads.....
Product Code: DIDACTICLABNLE-Export-038004.jpg "Flexure Testing Machine (Electrically Operated) For Testing Lab")
Same as above but instead of a hand pumping unit, a separate electrically cum hand operated pumping unit housed in a cabinet is supplied.....
Product Code: DIDACTICLABNLE-Export-038005
As Entertainment of air in limited percentage improves durability of concrete and very low percentages deteriorate it,....
Product Code: DIDACTICLABNLE-Export-038006
Same as above but 0.007 cubic meter capacity for maximum size of aggregate 38mm. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038007
Same as above but 0.01 cubic meter capacity for maximum size of aggregate 75mm. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038008
Same as above but 0.1 cubic meter capacity for maximum size of aggregate 150mm. Spaces: Rubber pressure bulb with tube and Gasket for vessel. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038009
The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement.....
Product Code: DIDACTICLABNLE-Export-038010
For 15cm dia x 30cm length cylinders. Salient Features Specifications The set comprises of a cylinder capper, a cylinder carrier and a ladle.....
Product Code: DIDACTICLABNLE-Export-038011.jpg "Capping Set ( Horizontal) -02 For Testing Lab")
For 100mm dia x 200mm length cylinder. Salient Features Specifications Same as above but for use with specimens 100mm dia x 200mm long. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038012
For capping compression cylinder specimens. This apparatus can be used both in the laboratory and in the field.....
Product Code: DIDACTICLABNLE-Export-038013.jpg "Apping Set (Vertical) - 04 For Testing Lab")
For 100mm dia x 200mm long. Salient Features Specifications : Same as above but for cylinders 100mm dia x 200mm long. CYLINDER CARRIER : For carrying the concrete cylinders in the laboratory and in the field.....
Product Code: DIDACTICLABNLE-Export-038014.jpg "Compression Testing Machine 2000 KN (Electrically Operated) For Testing Lab")
Compression Testing Machine (Electrically Operated) - Four Pillar type It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height.....
Product Code: DIDACTICLABNLE-Export-038015.jpg "Compression Testing Machine 1000 KN (Hand Operated) - 02 For Testing Lab")
The machine is designed for portability, operating convenience and accuracy. It is a compact and self contained. Unit ideally suited for mobile and field laboratories.....
Product Code: DIDACTICLABNLE-Export-038016
Digital, motorized, strain control etc., complete with Pumping unit Range 200 ton, 400 ton, 500 ton. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038017RilemCembureauTest.jpg "Flexure Testing Machine (Motorised) Rilem - Cembureau Test For Testing Lab")
It is used for testing 40mm x 40mm x 160mm mortar specimens for flexural strength. (Rilem Cembureau Test) by single point loading....
Product Code: DIDACTICLABNLE-Export-038018
Flexural tests of concrete beam have their own importance in concrete Road Constructions as well as Buildings constructions.....
Product Code: DIDACTICLABNLE-Export-038019
This is used for determining the workability of building limes. Salient Features Specifications....
Product Code: DIDACTICLABNLE-Export-038020
Flow Table....
Product Code: DIDACTICLABNLE-Export-038021
Specifications Same as above but electrically operated, to raise and drop the table top, approx. 15 times in 15 seconds. Suitable for operation on 230 Volts, 50 cycles, A.C.supply. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038022
This instrument is used for determining the time setting of hydraulic cement. Salient Features Specifications A base with a vertical shaft and two horizontal arms.....
Product Code: DIDACTICLABNLE-Export-038023RemoteType.jpg "Hydraulic Jack ( Hand Operated) Remote Type For Testing Lab")
For applying loads for varous tests in the field or laboratory. Hydraulic jack hand operated with separate pumping units. These jacks are portable and available in various capacities.....
Product Code: DIDACTICLABNLE-Export-038024RemoteType.jpg "Integral Type Hydraulic Jacks")
These are hydraulic jacks with integral pumping unit. The hydraulic pressure gauge is of 15cm dial mounted on the side of hydraulic jack.....
Product Code: DIDACTICLABNLE-Export-038025
The hydraulic jack has a 25mm diameter hole going through the centre. It is designed for dual direction and has a working stroke of approximately 22cm.....
Product Code: DIDACTICLABNLE-Export-038026
For making standard rectangular specimens of 40 x 40 x 160mm. of Portland and pozzolana cement mortar for determining the transverse strength.....
Product Code: DIDACTICLABNLE-Export-038027
The apparatus is used to determine the workability of Portland cement concrete. The Kelly Ball test is considered to be simple and much faster than the slump test.....
Product Code: DIDACTICLABNLE-Export-038028.jpg "Cement Autoclave(Laboratory) For Testing Lab")
With stainless steel chamber (21 kg/cm. Sq. Pressure) The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure.....
Product Code: DIDACTICLABNLE-Export-038029ForTestingLab.jpg "Laboratory Concrete Mixer (Motorised) For Testing Lab")
Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced.....
Product Code: DIDACTICLABNLE-Export-038030
This is a Hand Operated Concrete Mixer and is suitable to mix 1 cuf to 1.1/2 cft material. It is mounted on two rubber tyred / stand. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038031
The laboratory Jaw Crusher is designed for fast crushing of Aggregates, Ores, Minerals, Coal, Coke, Chemicals and other similar materials.....
Product Code: DIDACTICLABNLE-Export-038032
This is for determining the lateral extension of 15cms dia x 30cm high cement concrete cylinders while testing them under compression.....
Product Code: DIDACTICLABNLE-Export-038033
Used for finding specific gravity of Hydraulic Cement. Made from Borosil glass. The flask is 243mm in total height,....
Product Code: DIDACTICLABNLE-Export-038034
It is used for the determination of soundness by expansion method of ordinary and rapid hardening Portland cement, low heat Portland cement and class A lines.....
Product Code: DIDACTICLABNLE-Export-038035
It is used to measure the drying shrinkage of concrete autoclave expansion of Portland cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying. Salient Features Specifications....
Product Code: DIDACTICLABNLE-Export-038036
It is designed for finding out the deformation and strains on 15cms. diameter and 30 cms. high cement concrete cylinders when subjected to compressive loads.....
Product Code: DIDACTICLABNLE-Export-038037
It is used for mixing cement pastes, mortars and pozzolanas. Salient Features Specifications: the apparatus consists of an epicyclic type stainless steel paddle imparting both planetary and revolving motion by means of gears.....
Product Code: DIDACTICLABNLE-Export-038038
It is used for finding out the rate of hardening of mortars sieved from concrete mixtures by means of penetraion needles of different cross-sectional areas.....
Product Code: DIDACTICLABNLE-Export-038039
Specifications These are available in different sizes and are made according to Indian and British standards. For the metric size cube moulds....
Product Code: DIDACTICLABNLE-Export-038040
For testing concrete cylinders for compressive strength tests. Salient Features Specifications The moulds is split vertically into two parts.....
Product Code: DIDACTICLABNLE-Export-038041
Consists of mould 10cm. dia x 0.5cm. deep and a glass base plate. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038042
An increasing number of contractual obligations call for various forms of vibro-compacted concrete for achieving a better and more consistent mixture.....
Product Code: DIDACTICLABNLE-Export-038043
The laboratory pulverizer is a disc type grinder, designed to grind virtually any material to produce a fine mesh sample in one operation....
Product Code: DIDACTICLABNLE-Export-038044
Used for determining the slump of fine aggregate in the determination of bulk and apparent specific gravity and absorption of fine aggregate.....
Product Code: DIDACTICLABNLE-Export-038045
The mould is used for casting specimens of cement aggregate combinations for measuring the potential expansive alkali reactivity. Salient Features Specifications....
Product Code: DIDACTICLABNLE-Export-038046.jpg "Shrinkage Bar Mould ( Two Gang) For Testing Lab")
Shrinkage Bar Mould ( Two Gang)....
Product Code: DIDACTICLABNLE-Export-038047.jpg "Shrinkage Bar Mould (Four Gang) For Testing Lab")
Do as above but with four compartments. Spares : Stainless steel smooth or knurled and threaded reference pins as required. Supplied in packs of one dozen. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038048
It is used for the determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm. Salient Features Specifications....
Product Code: DIDACTICLABNLE-Export-038049
This is for use while casting a cement briquette. Salient Features Specifications: The standard spatula consists of a steel blade, of a special shape. A wooden handle is fixed to the stem of blade. The weight does not exceed 340gms. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038050
This is used for compacting concrete into cube moulds. This rod is made of steel. It is 16mm diameter, 60mm in length and rounded or bullet shaped at one end. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038051
Made of steel this is 40cm long, having a ramming face of 25mm SP. Other end has a grip, weight approximate 2 kgs.....
Product Code: DIDACTICLABNLE-Export-038052
A specially designed unit comprises of a plane place with "L" shaped border and an adjustable stand with a Dial Gauge 0.01 x 25mm to check the thickness of abrassed the specimen of size 7.06 x 7.06 cm. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038053
This is used for determination of resistance to wear for cement concrete flooring tiles.....
Product Code: DIDACTICLABNLE-Export-038054
Unit for finding flexural strength of clay roofing tiles and Cement Concrete flooring tiles. Flexural load is applied on the tiles using lead shots.....
Product Code: DIDACTICLABNLE-Export-038055
Specifications Weight approximately 210gm. Best quality with hardwood handle Blade length approx. 200mm. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038056
Specifications 100 to 150mm long steel blade with straight edges. civil lab equipments manufacturers....
Product Code: DIDACTICLABNLE-Export-038057
The instrument is used for workability as well as consistency for fresh concrete.....
Product Code: DIDACTICLABNLE-Export-038058
Also Called Mould Vibrator Or Mortar Cube Vibrator Concrete moulds are easily cast by using a tamping bar or a vibrating table.....
Product Code: DIDACTICLABNLE-Export-038059
Vibrating Table....
Product Code: DIDACTICLABNLE-Export-038060
Vicat Needle Apparatus....
Product Code: DIDACTICLABNLE-Export-038061
Vicat Needle Apparatus With Dashpot....
Product Code: DIDACTICLABNLE-Export-038062.jpg "Shrinkage Bar Mould (Three Gang) For Testing Lab")
Shrinkage Bar Mould (Three Gang)....
Product Code: DIDACTICLABNLE-Export-038063
Call Now to Order
Support Team
OEM & Tenders
Dealership