CAT NO: DIDACTICNLE-Export-081148
Peripheral Study Cards.
Study Cards can be connected to the 50 Pins KXT Bus of any 8/16 bit
Series Microprocessor Trainer Kits. In this Study Card LED's are
provided for different signals like Read, Write, Address Lines,Data
Lines, Chip Select & Ports depending upon the Peripherals.
Study
(PPI) STUDY CARD
24 bit I/O using Programmable Peripheral IC
All Input/Output ports pins are terminated on 3 eight pin terminals & 26 pin FRC Connector
All Input/Output ports are indicated by 3 mm LEDs
Data lines from AD0 to AD7 are indicated by 3mm LEDs
Chip Select, A0, A1, Read, Write are indicated by 3mm LEDs
Hardware Single Step and Full Clock Execution mode are provided
Single stepping can be performed using micro switch provided on board
Using this study card all MODE experiment can be performed
Interface Kit using 50 pin FRC Connector
User's Manual with Sample Programs
(PTC) STUDY CARD
Three channel Timer/Counter using Programmable Timer Counter IC
All Input/Output ports pins are terminated on terminals & 10 pin FRC Connector
Clock for Counter-0 is internally provided
Data lines from AD0 to AD7 are indicated by 3mm LEDs
Chip Select, A0, A1, Read, Write are indicated by 3mm LEDs
Hardware Single Step and Full Clock Execution modes are provided
Single stepping can be performed using micro switch provided on board
Card are supplied in Australian Pine Wood Enclosure
Using this study card all MODE experiment can be performed
Interface Kit using 50 pin FRC Connector
User's Manual with Sample Programs
(PPI WITH TIMER) STUDY CARD
22 bit I/O with single channel timer using 8155 Programmable Peripherals IC
All Input/Output ports pins are terminated on 3 eight pin terminals & 26 pin FRC Connector
All Input/Output ports are indicated by 3 mm LEDs
Data lines from AD0 to AD7 are indicated by 3mm LEDs
Chip Select, IO, Memory, Read, Write are indicated by 3mm LEDs
Hardware Single Step and Full Clock Execution modes are provided
Single stepping can be performed using micro switch provided on board
Using this study card all MODE experiment can be performed
Interface Kit using 50 pin FRC Connector
User's Manual with Sample Programs
(USART) STUDY CARD
Serial communication using Universal
Synchronous/ Asynchronous Receiver Transmitter IC
Output are provided on 9 pin D-Type connector
Data lines from AD0 to AD7 are indicated by 3mm LEDs
Chip Select, Read, Write, A0, A1, DTR, DSR, RTS, CTS, TxRDY, RxRDY are indicated by 3mm LEDs
Hardware Single Step and Full Clock Execution modes are provided
Single stepping can be performed using micro switch provided on board
Using this study card all MODE experiment can be performed
Interface Kit using 50 pin FRC Connector
User's Manual with Sample Programs