CAT NO: DIDACTICChemical Equipments0013
Fluidisation And Fluid Bed Heat Transfer Unit.
Fluidisation And Fluid Bed Heat Transfer Unit FLUIDISATION AND FLUID BED HEAT TRANSFER UNIT
DESCRIPTION:
This
is a dryer in which moisture removal takes place by fluidization of
solids particles by hot air. The set-up fitted with a specially
designed, vertical Glass Column. The lower portion of the column is
filled with fluidizing material. The material is supported on the screen
mesh held between two flanges. Air from a compressor is heated in the
heater box and passed through the column. Flow control and by-pass valve
are fitted to regulate the airflow. At the top outlet of column a
cyclone is provided to collect any solid particles taken out by the air
stream.
EXPERIMENTATION: To study the fluidized bed drying. To plot the drying curve under fluidized bed condition.
UTILITIES REQUIRED :Electricity Supply : 1 Phase, 220 V AC, 3 kW.Granular and free flowing solid of size 1 to 2 mm.
TECHNICAL DETAILS :
Column
: Material Borosilicate Glass Dia. 80 mm. Total Length 500mm.Cyclone
Separator : Material Stainless Steel, Compatible Capacity with
collector. Air Circulation : By forced draft fan, Arrangement is done
vary the air flow rate. Heating Chamber : Compatible capacity Heater :
Nichrome wire heater Temperature Sensors : RTD PT-100 type.Control panel
comprises of :Digital Temp. Controller : 0 199.9°C (For Hot Air)
Standard make on/off switch, Mains Indicator etc. Instruction Manual :
An ENGLISH instruction manual will be provided alongwith the Apparatus
The whole set-up is well designed and arranged in a good quality painted
structure
Chemical Engineering Laboratory lab equipment manufacturers,exporters and Chemical Engineering Laboratory Lab suppliers