• Civil Lab Mechanical Lab Engineering Lab Equipments
  • sales@didacticlabequipments.com

Embedded Trainer for Microchip PIC16F877 For Electrical Lab Training

Embedded Trainer for Microchip PIC16F877 For Electrical Lab Training

CAT NO: DIDACTICNLE-Export-114002

Embedded Trainer for Microchip PIC16F877 For Electrical Lab Training Description and Tender Specification:

Embedded Trainer for Microchip PIC16F877 For Electrical Lab Training.
GENERAL DESCRIPTION Embedded Trainer has been designed by using Microchip PIC16F877 Microcontroller. This controller provides in-system as well as in circuit programming so that one may be able to write program and download directly in the controller through serial port without removing it from the system. SYSTEM SPECIFICATION ·  CPU : Microchip PIC16F877 Microcontroller ·  16x2 LCD module ·  Six Seven Segment Displays ·  Stepper Motor Controller Interface ·  8x8 LED Matrix Display ·  EWSN Status LED's 12 Nos. ·  ADC/DAC Interface ·  Four Data Switches ·  Switch Array ·  At24C16 Serial EEPROM ·  High Performance RISC CPU: ·  Only 35 single word instructions to learn ·  All single cycle instructions except for program branches, which are two-cycle ·  Operating speed :  DC - 20 MHz clock input DC - 200 ns instruction cycle ·  Up to 8K x 14 words of FLASH Program Memory, Up to 368 x 8 bytes of Data Memory (RAM), Up to 256 x 8 bytes of EEPROM Data Memory ·  Pinout compatible to other 28-pin or 40/44-pin PIC16CXXX and PIC16FXXX microcontrollers Peripheral Features ·  Timer0: 8-bit timer/counter with 8-bit prescaler ·  Timer1: 16-bit timer/counter with prescaler, can be incremented during SLEEP via external crystal/clock ·  Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler ·  Two Capture, Compare, PWM modules Capture is 16-bit, max. resolution is 12.5 ns Compare is 16-bit, max. resolution is 200 ns PWM max. resolution is 10-bit ·  Synchronous Serial Port (SSP) with SPITM (Master mode) and I2CTM (Master/Slave) ·  Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) with 9-bit address detection ·  Parallel Slave Port (PSP) 8-bits wide, with external RD, WR and CS controls (40/44-pin only) ·  Brown-out detection circuitry for Brown-out Reset (BOR) Analog Features ·  10-bit, up to 8 channel Analog-to-Digital Converter (A/D) ·  Brown-out Reset (BOR) ·  Analog Comparator module with: Two analog comparators Programmable on-chip voltage reference (VREF) module Programmable input multiplexing from device inputs and internal voltage reference Comparator outputs are externally accessible DAUGHTER BOARDS AVAILABLE ·  Board for Microchip PIC16F876/16F84 ·  Board for Motorola 68HC11 ·  Board for Xilinx Spartan XC2S50 (50 K Gates) ·  Board for Xilinx Spartan XC2S100 (100 K Gates) ·  Board for Xilinx Spartan XC2S200 (200 K Gates)

Support