CAT NO: DIDACTICNLE-Export-120002
Automatic Compression Testing Machine.
Technical Description
The Automatic Compression Testing
Machine has all features of Micro Controller based Compression Testing
Machine. In addition, it has:
The machine is available in 500kN, 1000kN, 2000kN, 3000kN ranges.
An automatic load release facility.
A facility for transmission of data to the serial port of a computer placed with in 200 meters of the loading unit.
Support
for data transmission over distances upto several kilometers. This is
useful for testing in the field. (Optional feature)
Measurements of Strain with a resolution of upto 0.001 mm (optional feature).
Measurement of Flexural Strength (optional feature)
Facility to enter the required pace rate, at the beginning of the run.
The load resolution is for is 0.1kN for machines upto 1000kN capacity & 1.0kN for the 2000kN & 3000kN machines.
The Unit Comprises of:
Loading Unit
The
loading unit is of fully welded construction having a cross head, base
and solid side plates. The hydraulic jack is fixed to the base. The
platens of the machine are hardened, ground and polished. The upper
platen is provided with self-aligning action. To facilitate testing of
various size specimens, suitable size spacers are provided.
Pumping Unit
This has a two-speed hydraulic motor driven pump and a bonded strain gauge based pressure transducer.
This convert data transmitted by the digital head to a form recognized by the computer.
The system is compatible with any computer with the following specifications:
P-IV and above, 1.9Ghz
256 Mb RAM
Intel Chipset with on-board graphics card.
40 GB HDD
1.44MB FDD & CD ROM DRIVE
Standard Keyboard
1 Serial Port
1 Parallel Port
Printer HP 5550 or latest
UPS APC 500 VA or equivalent
Pumping Unit
This has a two-speed hydraulic motor driven pump and a bonded strain gauge based pressure transducer.
Geotextile Technology & Concrete Technology Lab equipment manufacturers,exporters and Geotextile Technology & Concrete Technology Lab suppliers